CG FC200 ECU Programmer Full Version with MPC5XX Adapter for Module Clone and Intelligent Recognition

Product Description

CG FC200 ECU Programmer Full Version with MPC5XX Adapter for BO.SCH MPC5xx Read/Write Data on Bench

FC200 Highlights:

1. Bundle Deal with CG FC200 Full Version with All License Activated and MPC5XX Adapter.

CG FC200-MPC5XX-P02-M230102 adapter can be used for MPC5X series clone without opening cover.

Support BO.SCH MPC5xx platform mode ECU: MED9.1, MED9.5, MED9.5.10, ME9.0, EDC16CP31, EDC16CP35, EDC16C2, EDC16C8

2. Protect Original Car Parts

More than 98% of ECUs support BENCH mode and OBD mode, no need to open the cover and punch holes to protect the original car.

3. Intelligent Recognition

The "identification" function can help users better diagnose whether the ECU module is communicating and check whether the wiring is wrong. If the ECU module can communicate without damage and the wiring is correct, the recognition can be successful, and the chip information, hardware information and firmware information can be read out.

4.Module Clone

Supports ECU data reading and writing and module cloning, no synchronization matching, no online programming, data sub-regional burning, automatic verification, and maximum protection of chips and modules.

5. ISN Read and Write

Supports engine computer ISN code acquisition for all BMW series (including Mini), which is convenient for key matching and anti-theft maintenance.

6.VIN modification

Solve the problem of double VIN or VIN mismatch of vehicles, which is convenient for vehicle maintenance.

7. Data Processing

Support engine computer data analysis and modification for Audi/Seat/Skoda/Volkswagen models;

Support the shutdown of BO.SCH MED/EDC17 series engine computer anti-theft system;

Support the TPROT off function of BO.SCH VAG MEDC17 series, BMW/Mini MEVD17/EDC17 series, Hyundai/Kia EDC17/MED(G)17 series.

8. FC200 not only support BMW ECU but also support over three thousands of ECUs like KTAG, Kess, Dimsport etc.

9. There are 3 Operating Modes: CAN-BUS, Bench Mode and Boot Mode

10. Multi-Language: English, French, Simplified Chinese (Traditional Chinese, Spanish, Polish and Turkish need to pay)

11. Full Version with All License Activated, including Denso and China Delphi.

Free Update Online for One Year. Annual Fee will be $200/year after the first year.

12. With CG FC200-MPC5XX-P02-M230102 adapter can be used for MPC5X series clone without opening cover.

Supported ECU Models: ME9.0, MED9.1, MED9.5.10, EDC16C2, EDC16CB, EDC16CP31, EDC16CP35. More models are being upgraded.

CG FC200 Latest Updae Information:

CG FC200 1.3.2.5 (2025.12.08)

1. Added CAN Unlock Support for M7 and ME7.8.8

Supported brands (ME7.8.8):

BYD, BAIC, Buick, Changan, Changhe, Chery, Chevrolet, Dongfeng, Fujian Motor, Foton, FAW, Geely, Great Wall, Hafei, Hawtai, Haima, JAC, Jinbei, Leopaard, Lifan, MG, Mitsubishi, Roewe, SWM, SAIC, Soueast, Suzuki, Trumpchi, Wuling, Xiali, Zotye, Brilliance

Supported brands (M7):

BYD, BAIC, Buick, Changan, Changhe, Chery, Chevrolet, Dongfeng, Fujian Motor, Foton, FAW, Geely, Great Wall, Hafei, Hawtai, Haima, JAC, Jinbei, Leopaard, Lifan, MG, Mitsubishi, Roewe, SWM, Soueast, Suzuki, Trumpchi, Wuling, Xiali, Zotye, Brilliance

2. Added DTC Off Support:

BMW: MG1CS024

Ford: EMS2204, EMS2205

Hyundai / Kia: MD1CS012

Volkswagen: MED9.5

Ferrari: MED9.6.1

3. Function Optimizations:

Optimized “Not Ready State Repair” algorithms for:

M7, M7.9.7, M7.9.7.1, ME7.8.8, ME7.9.71

Fixed VIN writing issue for MEV17.2.1

Fixed Mazda Pxxx SH72543 recognition failure

Improved “Not Ready State Repair” for ME7.5.10 and SIM2K-D51

Optimized DTC Off functionality for:

Land Rover: MED17.8.3x, MED17.9.7, MED17.9.9, MEDC17.9

Mercedes-Benz: MED17.7.x, MD1CP001, ME9.7

BMW: MEVD17.2.x, MG1CS201, MED17.2

Volkswagen / Audi Group:

MG1CS002, MG1CS003, MG1CS011, ME7.1, ME7.5,

MED17.1, MED17.1.1, MED17.1.6, MED17.1.21, MED17.1.27,

MED17.5, MED17.5.2, MED17.5.5, MED17.5.21, MED17.5.25, MED9.1

Ford: MD1CS005

Fiat: ME17.3.0

Peugeot / Citroën: MED17.4.x

V1.3.2.4 (2025.12.03)

Added CALID repair support for the following ECUs:

—Hyundai / Kia: M7.9.8, —Hyundai / Kia / Dodge: ME17.9.1

—BAIC / Bestune / Buick / BYD / Changan / Changhe / Chevrolet / Chery/ Dongfeng: ME17.8.8 TC1728 (BOOT), ME17.8.8 TC1767 (BOOT)

Added new ECU types: —Mahindra / Leyland: DCM2.5 —TA.TA: DCM2.5P — Isuzu: DCM7.1AP

Added VIN repair support: Hyundai: ME17.9.8

Optimized read/write functions for TA.TA DCM2.5

V1.3.2.3 (2025.11.21)

Added ECU Types: Hyundai/Kia: MG7.9.8 (Boot), Tangjun: ME7.8.8 M7, BMW: MSV80.0/ MSD87.2 /MSD85.0, Huanghai: ME7.8.8/M7 / MT62.1, IsuZu: EDC17C81, Soueast:MG1UA008/ MG1UA-UP8,

Zhonghua: ME17.8.8 1728 1767/ ME17 (black), SAIC: MG1UA008

Added BMW Coolant Temperature Settings: MG1CS024,MG1CS201

Function Repair: Repaired and optimized data processing-EDC17CV53, EDC17CV54,EDC17C63

V1.3.2.2 Registered Version (2025.11.17)

1.Added new ECU type: Dongfeng DCM7.1AP.

2.Added new BMW coolant temperature settingS:N54 (MSD87 / MSD87.2),MEV17.2.1

3.Added new Immobilizer Off support: ME7.4.5.

4.Optimized SIM2K-260 password reading,ME7.8.8 and M7 series unlocking functions.

V1.3.2.1 Registered Version (2025.11.13)

1.Fixed an issue where the software would crash during data writing for some ECUs.

2.Fixed an issue where "The three monitor not-ready"

functions failed to execute for ECUs such as FC-34, LEC4AF,and LEC4AP.

3.Fixed a data writing failure issue in ME9.7.

V1.3.2.0 (2025.11.11)

1.Added PCR2.1 lock and unlock functions.

2.Added ECU types:

Volkswagen/Audi: SIMOS16.1

Mercedes-Benz: ME9.7

Jianghuai: MT92

Foton: MD1CC878

Iveco: MD1CS089

FAW: EDC16C39, MED17.8.32

Zhonghua/Haima: SIM2K-91

Chevrolet: MT60 (TC1766)

Great Wall: EDC17C55

Jiangling/Jianghuai: EDC17C53

Dongfeng/Fuqi: ME17.8.8 (TC1767)

Fuqi: ME17.8.8 (TC1728)

Feidie: MG1UA-UP8, MG1UA008

BAIC/Changan/Qirui/Dongfeng/FAW/Foton/Geli/Jianghuai/Jinbei/Jiangling/Lifan/MG/Roewe/Suzuki/Zhonghua/Trumpchi: MT20U2

3.Added DTC disable function for vehicle models:

Volkswagen: VAG Delphi DCM 3.7, VAG BO.SCH EDC17_CP24

Fiat: Fiat Marelli MJD6F

Jeep: Jeep Motorola NGC4/NGC5

4.Added PCR2.1 IMMO disable function.

5.Added ME9.7 unready state repair function.

6.Function optimization and bug fixes:

Optimized read/write function for MG1US008.

Optimized mileage repair function for Volkswagen transmission DQ200 TC1784.

Fixed read/write function in platform mode for CPEGD2.20.3.

Optimize the MT62.1 read-write process

CG FC200 V1.2.9.3 Registered Version New (2025.07.16) Update Information:

1. Added DTC-OFF function, fourth batch of models:

VAG:MED17.1,MED17.1.1,MED17.1.6,MED17.1.21,MED17.1.27,

MED17.5,MED17.5.2,MED17.5.5,MED17.5.21,MED17.5.25,

MED9.1,ME7.5.10,ME7.5.20,ME7.5.30

MG1CS008,MG1CS001,MG1CS111,MG1CS002

Mercedes:SIM271DE,SIM271KE

psa:MED17.4,MED17.4.2,MED17.4.4,MD1CS003

Land Rover:EDC17CP42,EDC17CP55,MEDC17.9

Porsche:SDI4,SDI6,SDI7,SDI8,SDI9,SDI21.x

VO.LVO:EDC17CP22,EDC17CP48

Honda:EDC17CP16,

BMW:EDC17CP45

iveco:EDC17CP52

jeep:EDC17CP27

Fiat:EDC17CP52,ME17.3.0

renault:MD1CS006

CNH:EDC17CV41

Man:EDC17CV42

alfa romeo:MED17.3.3

2. Added "Idle speed modification" function for vehicle models

Honda:

37820-Rxx-Hxx SH7058

37820-5xx-Bxx SH72543

Hyundai-Kia:

ME17.9.11,ME17.9.1,ME17.9.11.1,

MEG17.9.12,MEG17.9.13,MED17.9.8,MEG17.9.8,MEG17.9.21,

SIM2K_140,SIM2K_141,SIM2K_341

3. New ECU models added:

JBC/JAC:LINCONTROL LEC4AF,LEC4AP

BAIC/Dongfeng/Geely/Changan/Proton:BO.SCH MG1UA008,UP8

DFM-Future:AECS FC-34

VAG:CONTINENTAL Simos8.6

Dongfeng:MD1CC878

Fukuda:MD1CS089

Buick:ME17.U.6

FAW/Jiangling Motors:MD1CE108

BYD/Haima:M7.9.7,M7.9.7.1,ME7.9.71

Bug fixes:

1. Optimize the issue of failed PFlash writing in Wuling Easy-U3.6

2. Optimize the issue of reading and writing failures in some parts of Wuling Easy-U2.5 and U2W

CG FC200 Update V1.2.9.2 Update Information June 18th, 2025:

1. New BMW Coolant Temperature Setting feature added.

2. DTC Off function now supports more vehicle models.

3. Added support for new ECU models.

4. "Three readiness monitors not ready" now supports more ECU types.

5. Added a toggle for the Checksum feature in the Settings.

6. Added more ECU types supporting the VIN Modification feature.

CG FC200 V1.2.9.1 Update Information June 9th, 2025:

1. Added New ECU Models with DTC OFF Functions:

BMW BO.SCH:

(B48): MD1CP002, MD1CS001, MG1CS003, MG1CS201

(N13N20N55B38): MEVD17.2, MEVD17.2.3, MEVD17.2.4, MEVD17.2.5, MEVD17.2.6, MEVD17.2.8, MEVD17.2.9, MEVD17.2.G, MEVD17.2.H, MEVD17.2.K, MEVD17.2.P

BMW Continental: MSD81, MSV90

Ford-BO.SCH: MD1CS005

Jaguar/Land Rover-BO.SCH: MED17.8.31, MED17.9.7, MED17.9.9

Mercedes Benz BO.SCH: EDC17CP57, MD1CP001, MG1CP002

Volkswagen BO.SCH: EDC17CP54, EDC17CP74, EDC17C74, MD1CP004, MD1CP014, MD1CS004

2. Added New ECU models:

Wuling:

CONTINENTAL Easy_U2.5 SPC564xx

CONTINENTAL Easy_U2W SPC564xx (1.2.9.2 upgrade)

CONTINENTAL Easy_U3.6 SPC564xx (1.2.9.2 upgrade)

CONTINENTAL Easy_U3D/U3E SPC564xx (1.2.9.2 upgrade)

Geely: CONTINENTAL Easy_U2 SPC564xx

CG FC200 V1.2.9.0 Registered Version (2025.05.24):

New Functions:

1. Added "DTC OFF" function, first batch of models:

BMW BO.SCH: EDC16C31, EDC16C35, EDC16CP35, EDC17C06, EDC17C41, EDC17C50, EDC17C56, EDC17CP02, EDC17CP09

Mercedes DELPHI: CRD2.x, CRD3.x

Mercedes BO.SCH: EDC16C32, EDC16CP31, DCU17PC42, EDC17C66, EDC17CP01, EDC17CP10

Volkswagen DELPHI: DCM6.2

Volkswagen BO.SCH: EDC16U1, EDC16U31, EDC16U34, EDC16CP34, EDC17C46, EDC17C54, EDC17C64, EDC17C74, EDC17CP04, EDC17CP14, EDC17U01, EDC17U05

Volkswagen CONTINENTAL: PCR2.1, SIMOS8.1, SIMOS8.2, SIMOS8.3, SIMOS8.4, SIMOS8.5

Hyundai/Kia BO.SCH: EDC16C39, EDC17C08, EDC17C53, EDC17C57, EDC17CP14

Opel GM: E78, E80, E83, E98

Opel BO.SCH: EDC16C39, EDC17C11, EDC17C18, EDC17C19, EDC17C42, EDC17C59, EDC17C60, EDC17C84

Mazda DENSO: R2xx, RFxx, SH1x

PSA DELPHI: DCM 3.5, DCM 6.2A, DCM 7.1A

PSA BO.SCH: EDC16C34, EDC17C10, EDC17C60

Renault BO.SCH: EDC16C36, EDC17C11, DC17C42, EDC17C84

Subaru DENSO: KS/DT

Toyota BO.SCH: EDC17C73, EDC17CP07

Toyota DENSO: Diesel Gen3

Land Rover BO.SCH: EDC17CP11

Fiat BO.SCH: EDC16C39, EDC17C49, EDC17C69

Ford DELPHI: DCM6.1

Ford BO.SCH: EDC17C70, EDC17CP05

Honda BO.SCH: EDC17_CP06

Iveco BO.SCH: EDC16C39, EDC17C49, EDC17C69

Jeep BO.SCH: EDC17C79

CNH BO.SCH: EDC17C49

2. Newly added ECU models:

Buick: MT60.1 MC9S12XEP768

WuLing: MT60.1 MC9S12XEP768

Shacman: EDC17CV44

Great Wall: M7.9.7, M7.9.7.1, ME7.9.71, MT20U2 MC9S12XET256

ChangHe: MT20U2 MC9S12XET256

HAWTAI MOTOR: ME7.8.8,M7

HAFEI: ME7.8.8, M7, TR40

DongFeng: EDC17C81

FOTON: TR40

Bug fixes:

1. Fix the issue where some Volkswagen ME17.5.22/24/26 failed to modify VIN

2. Fix the issue of partial SID209 password read failure

CG FC200 V1.2.8.0 Update Information (2025.05.20):

New Functions:

1. Newly added models with "three items not ready" function:

BMW: MSV90, MEVD17.2.2, MEVD17.2.8, MEVD17.2.H

Hyundai/Kia: SIM2K-240, SIM2K_341

2. Volkswagen DQ380/DQ381 TCU adds "mileage repair" function

3. New Hyundai/Kia ECU/TCU:

SIM2K-250_ECU, SIM2K-250_TCU, SIM2K-260, SIM2K-140_ECU, SIM2K-140_TCU, SIM2K-141_ECU, SIM2K-141_TCU

4. Add read-write function, "modify VIN" and "three items not ready" function to Xiali DFO JH30 module

5. Added read-write function, "VIN modification" and "three items not ready" function for SAIC Maxus DFO TR20 module

6. ECU with added verification function: MD1CC878, DCM3.7AP

Bug fix:

1. Optimize the "three items not ready" function of DCM7.1AP

2. Fix the issue where some BO.SCH TC17xx ECU prompts that the version is not supported

3. Fix the issue of failed verification of PFlash in CPEGP2.10.1

4. Optimize the verification function of DCM7.1AP

5. Optimize the verification function of GM E37/E78/E83

6. Optimize the verification function of PCR2.1

7. Optimize the verification function of 9HP

8. Optimize the verification function of MT80

CG FC200 V1.2.7.0 Update Information (2025.04.30):

New Functions:

1. ECU with added "modify VIN" function:

BO.SCH TC2xx:

MD1CP001, MG1CS003, MD1CP002, MD1CS006, MG1CP002, MG1CS080, MD1CP004 SPC5777, MD1CP004_ TC298TP,

MD1CS004, MG1CS001, MG1CS002 SPC5777, MG1CS002_ TC298TP, MG1CS111, MD1CP014, MG1CS008_ TC298TP, MG1CS016,

MG1CS017, MG1CS018, MG1CS019, MG1CS032, MG1CS026, MG1CS024, MG1CS201, MD1CS001, MG1CA007

BO.SCH TC17xx:

EDC17U01, EDC17U05, ME17.5.20, MED17.1.61, EDC17CP74, ME17.7.8, EDC17CP06, EDC17CP16, DCU17PC42, EDC17CP58, MED17.6.9,

EDC17CP68, EDC17C61, EDC17C47, ME17.8.31, ME17.8.32, EDC17CP05_ TC1797, EDC17CP05 TC1796, ME17.8.3.3, ME17.8.33, ME17.8.5, M17.8.7

BO.SCH MPC 5xx:

MED9.1, ME9.0, EDC16CP31, EDC16CP35, EDC16U31, EDC16C2, EDC16C1, EDC16U31, ME9.1.1, MED9.1.1, MED9.1.2

BO.SCH ST10xx:ME7.7.0,ME7.9.9,ME7.1.1,ME7.8.2,ME7.6.4

CONTINENTAL/Siemens:

SIM271KE, SIM271DE, SDI7, SDI6.1, SIMOS8.4x, SID208, SID310, EMS3110, EMS2511, EMS24xx, GPEC3, GPEC2A, GPEC4, GPEC4LM, GPEC2

DENSO:

MB279700-9500, MB279700-9811, MB279700-9801, MB279700-96xx, RF7x, RF8x, 33920-67P0, R2xx, Pxxx, S5xx, SHxx, 275700_7082, RA6, 4N14,

23740_5Sxxx_Gen2, 23740-5Sxxx_Gen2, 23740-3Nxxx_Gen1, Subaru SH72531, 112800 SH72531

GM: E38, E39, E39A, E78, E80, E83, E98, E84

Hyundai/Kia: SIM2K_240_ECU, SIM2K_241_ECU, SIM2K_240R_ECU

Mitsubishi: E6T6xxxx,E6TAxxxx

DELPHI:DCM3.7AP,DCM3.5

Marelli:8TDW

2. Add the "Three Not Ready" function:

Peugeot/Citroen:MED17.4.2 TC1767, MED17.4.2_ TC1797, MED17.4.4, MEV17.4, MEVD17.4.4, MEV17.4.2 TC1766, MEV17.4.2_ TC1767

Maserati:MED17.3.4, MED17.3.5

BENZ/Smart:ME7.7.0

BMW:ME17.2.1

3. ME17.8.8 adds CALID modification function

4. Dongfanghong tractor EDC17CV54 time repair

5. JMC EDC17C55 mileage repair

6. Added Volkswagen MG1CA811

CG FC200 V1.2.6.0 Registered Version New (2025.02.27)

New Functions:

1. "Three readiness monitors not ready" function:

DELPHI: MT22.1, ME22.1.1, MT22U

Jiangling/Foton/Great Wall: EDC17C81/EDC17C63/EDC17C53

Jaguar Land Rover: MED17.0.1, MED17.0, MED17.9.7, MED17.9.8, MED17.9.9, MED17.8.31, MED17.8.32

Fiat: ME17.3.0

2. ECUs with newly added checksum: MT20U, MT22U, MT20U2, MT22.1, MT22.1.1

3. M7, ME7.8.8 added the function of modifying CALID code

4. Added Wuling SIM2K-D51 module, and supports verification function, VIN modification and three readiness monitors not ready functions

5. Added Wuling SCE60 module

6. Added Hyundai SIM2K-47 module

7. Added ECUs with VIN modification function:

Marelli ECU: 8GMK, 8GML, 9GC

BO.SCH ECU: ME7.4.5, M7.9.8

8. Added ECUs:

Volkswagen: simos12.1

Hyundai Kia: MEDG17.9.8

Bug fixes:

1. Optimized the read and write functions of ME17.9.23 and ME17.9.21.1, EDC17C69

2. Fixed the problem of some DCM7.1APs failing to read and write PFlash

3. Optimized three readiness monitors not ready of Wuling SIM2K-51.4

FC200 V1.2.5.2 Registered Version (2025.01.18)

New Functions:

1. Added three ECUs with unready functions for domestic models:

Silver housing: ME17, ME17.8.8, MED17, MED17.8.10, MED17.8.2, MED17.8.21

Black housing (Black): ECU6.1, ME17, ME17.U.6, UP6

2. Added three ECUs with unready functions for Hyundai Kia: MEG17.9.12, MEG17.9.13, MEG17.9.2, MEG17.9.21, MEG17.9.8, ME17.9.1, ME17.9.11, ME17.9.11.1, ME17.9.21, ME17.9.21.1, MED17.9.30, MED17.9.8, EDC17CP14, ME17.9.8

3. Added Jinbei Lingdian ECU and supports VIN change and three unready functions: LINCONTROL LEC4A, LINCONTROL STC-213

4. Added Volkswagen Skoda ME7.5.20 three unready and VIN change functions

5. Chery ME7.9.7 added ExtFlash verification algorithm

6. Added BO.SCH ECU: UP6 TC1728, MED17.8.21, ME17.9.8

7. Added Huasong N20 model and supports VIN code change

8. Added BO.SCH VIN change ECU: MEG17.9.13, ME17.9.1, EDC17CP48, EDC17C69, EDC17C83, ME17.3.0, EDC17C10, EDC17C58, ME17.0.3, EDC17C70

Bug fixes:

1. Fixed the issue of ME17/ME17.U.6/ECU6.1 failing to modify VIN

2. Optimized the verification algorithm of M7/ME7.8.8/M7.9.7/SIM2K-51.4

3. Fixed some bugs and optimized software performance

FC200 V1.2.5.1 Registered Version (2025.01.15)

New Functions:

1. Added Wuling SIM2K-51.4 read/write, VIN modification, and three unready functions

2. Added Jinbei Lingdian TR40 read/write, VIN modification, and three unready functions

3. Added three unready functions of Volkswagen ECUs: MED17.1.6, MED17.1, MED17.5, MED17.5.1, MED17.5.2, ME17.5.22, MED17.1.10, MED17.5.20, MED17.5.25, MED17.5.5, EDC17CP14

4. Added three unready functions of BMW N20/N55/B38/N13 ECUs: MEVD17.2.5, MEVD17.2.4, MEVD17.2.9, MEVD17.2.P, MEVD17.2, MEVD17.2.6, MEVD17.2.G, MEVD17.2.K, MEVD17.2.3

5. Added verification function ECUs: ME7, ME7.8.8, ME7.9.7, ME7.9.71, M7.9.7, M7.9.7.1, ME7.5.20

Bug fixes:

1. Fixed the problem of failure to write PFlash data in some ME17.9.64

2. Fixed the problem of failure to backup data of Honda Keihin KEIHIN series ECU

3. Fixed the problem of PFlash verification failure of Hyundai Kia CPGDSH2.26.1

4. Fixed the VIN code change function for ME17.9.1, ME17.9.11, ME17.3.0, and EDC17C81

5. Fixed some bugs and optimized software performance

FC200 V1.2.5.0 Registered Version New (2025.01.06)

New Functions:

1. Added the "Three readiness monitors not ready" function of GM E37E38E39E39AE78E80E83E84 ECU

2. Added MELCO (Mitsubishi) series BENCH mode ECU:

MELCO E6T6xxxx MH8501F

MELCO E6TAxxxx MPC5746R

MELCO E6T85xxx MH8601 test

MELCO E6T8xxxx MH8115 test

MELCO E6T7xxxx MH8611 test

MELCO E6T86xxx MH8115 test

3. Added BO.SCH (BO.SCH) BENCH mode ECUTCU:

MG1CS080 TC275TP test

INVCON2.3 TC1797

HV17.4.1 TC1797

4. Added the "Repair of Lovol engine duration" of data processing to Lovol ECU: EDC17C63, EDC17CV54

5. Added the BOOT mode read and write function for GM E83

6. Added the function of reading and writing DFlash, PFlash, Maps, and ExtEEPROM separately for Mercedes-Benz SIM271DE

7. Added the "Unlock" function of VO.LVO MB279700-96xx

8. Added "Read Password" function in Hyundai Kia CPEGP2.10.1 boot mode

9. Bug fixes

Optimized the "Turn off anti-theft" function of EDC17C53, EDC17C63, and EDC17C81

Optimized Porsche SDI10.x ECU wiring diagram

Fixed the problem that Mercedes-Benz CRD3P.C0 and CRD3P.D1 can not be read and written

Fixed the problem that DCM2.5 failed to write PFlash

Fixed the problem that M7 failed to recognize but can read and write

Fixed the problem that VGS2-FDTC failed to recognize after the updated version

Optimized the process of M7.9.7, M7.9.7.1, ME7.9.7, ME7.9.7.1 to handle the "Three readiness monitors not ready" function

Fixed the problem that Honda 37820 SH7058 does not communicate with ECU after writing data

FC200 ECU Programmer Powerful Functions:

1. Original parts Protection

FC200 supports OBD and platform mode for more than 98% ecu and egs, no need to open shell, no punch, protect origianal parts of the vehicle.

2. Smart Identification

The "identification" function can help users diagnose whether the ECU module is communicating and check whether the wiring is wrong.

If ECU module is not damaged and can be communicated, wiring is correct and identification is successful, can read chip and firmware information.

3. Module Clone

Supports ECU/EGS reading& writing and modules clone, synchronization matching free, no need online programming.

Flash data by area, automatically check, protect chips and modules furthest

4. ISN Reading and Writing

Supports all BMW series (including Mini) ECU ISN code acquisition , convenient for all keys lost matching and anti-theft fault maintenance.

5. VIN Writing

Solve the problem of double VIN or VIN mismatch of vehicles, convenient for vehicle maintenance.

6. Data Processing

Support data analysis and modification for the 4th and 5th generations of Audi/Seat/Skoda/Volkswagen ECUs

Turn off anti-theft system for B.osch MED/EDC17 series ECU

TPROT off function of Bo.sch VAG MEDC17 series, BMW/Mini MEVD17/EDC17 series, Hyundai/Kia EDC17/MED(G)17 series.

FC200 ECU Programmer Software Display:

1. Interactivate Software Interface

brand-model-engine/gearbox-ECU interface structure to help users save time and find the operating directory accurately.

2. Built-in Model Search Function

Support ECU model and Bo.sch search by number, avoid the trouble of level selection, and enter the function interface as quickly as possible.

3. ECU Search

Take the BMW MSV90 ECU as an example, First select "BMW", selct "ECU" as the search condition, enter "MSV90",click the search button, and the ECU type will show up.

Same search procedure for Bo.sch ECUs.

4. Visualized Wiring Diagram

1:1 simulation, bright colors, to avoid wiring errors.

FC200 ECU Programmer Hardware:

FC200 Main Unit

1. Integrated injection of polymer materials, professional customized internal circuit boards, national patent certification

2. Exquisite design, easy to carry, can shield surrounding interference signals, adapt to various operating environments

3. There are 3 expansion ports for peripherals, which are automatically diagnosed and identified. They are 12V power port, USB port and DB15 port.The DB15 port can be connected to a free-dismantling adapter and OBD cable.

FC200 Adapters

1.Vehicle-grade wiring harness, made of synthetic metal, has excellent internal conductivity, and can be used continously for 10,0000 times.

2. Tight design, seemless connection between ECU and host to ensure continuours communication and excort your operation

3. Equipped with B-type, C-type, D-type, F-type and G-Type pin interfaces, suitable for many types of ECU and EGS

OBD2 Cable

FC200 obd2 cable mainly suitable for BMW B48/B58 ECU at present, read ISN via OBD without disassembly.

110cm, made of synthetic material, resistant to high temperature water-proof, anti-corrosion is designed according to OBD port of the vehicles, built-in anti-falling buckle make connection stable

CG FC-200 Package:

1pc x CGDI FC200 Host

1pc x OBD Cable

1pc x Jumper

1pc x USB Cable

6pcs x G-type Adapter Cable

3pcs x F-type Adapter Cable

6pcs x E-type Adapter Cable

6pcs x D-type Adapter Cable

6pcs x C-type Adapter Cable

6pcs x B-type Adapter Cable

1pc x MPC5XX Adapter