News - JIU TECH Enterprise Co., Ltd of page 3

ECM Titanium Tuning Tips-Hardcut and Launch Control on Bosch EDC17C54

2026-05-21 15:40:31

ECM Titanium Tuning Tips Hardcut and Launch Control on Bosch EDC17C54. Make the most of your workshop’s potential with ECM Titanium. 30.04.2026 On the 2.0 TDI platform, especially on the VW Passat B7 equipped with Bosch EDC17C54 ECU, engine management integrates structured strategies related to ...

New BENCH protocol for motorcycles/ATV – Delphi MT05.2.

2026-05-21 15:41:55

New BENCH protocol for motorcycles/ATV – Delphi MT05.2. KESS3 expands intervention capabilities on Delphi electronics, now also in BENCH mode. 29.04.2026 – Upgrade 3.12 Development dedicated to the motorcycle segment continues with the introduction of BENCH mode support for Delphi MT05.2 ECUs, ...

New BENCH protocol for Mitsubishi 2UD-8591A-00 – Yamaha.

2026-05-21 15:45:50

KESS3 Protocols Releases New BENCH protocol for Mitsubishi 2UD-8591A-00 – Yamaha. Gain greater control over the most widespread Yamaha ATVs on the market. 27.04.2026 – Upgrade 3.11 The development dedicated to the ATV segment expands with the introduction of BENCH mode for Mitsubishi 2UD-8591A-00 ...

New BENCH protocol for Bosch MD1CC878 SPC58 – Ashok Leyland

2026-05-21 15:47:14

New BENCH protocol for Bosch MD1CC878 SPC58 – Ashok Leyland. Efficiency and optimized consumption on small Indian LCVs, on bench with KESS3. 24.04.2026 – Upgrade 3.10 Support for Ashok Leyland vehicles expands with the introduction of BENCH mode for Bosch MD1CC878 SPC58 ECUs, installed on 1.5 TDCR ...

New BENCH protocol (with cloning) for Bosch MED17.U.6 – Chery.

2026-05-21 15:49:00

KESS3 Protocols Releases New BENCH protocol (with cloning) for Bosch MED17.U.6 – Chery. Repair, performance and control in a single operational process. 22.04.2026 – Upgrade 3.09 After the already available BOOT mode support, BENCH mode with cloning is now introduced for Bosch MED17.U.6 ECUs, ...

ECM Titanium Tuning Tips-Hardcut and Launch Control on Bosch EDC17C54

New BENCH protocol for motorcycles/ATV – Delphi MT05.2.

New BENCH protocol for Mitsubishi 2UD-8591A-00 – Yamaha.

New BENCH protocol for Bosch MD1CC878 SPC58 – Ashok Leyland

New BENCH protocol (with cloning) for Bosch MED17.U.6 – Chery.

JCB 2026.5 Latest Diagnostic Software | Heavy Duty Construction Machinery Scanner

Isuzu Idss Diangostic Service System

Weichai Diagsmart-V3.7.3.7

USB-Link 3 NDlS Device ( NEXIQ 3 ) - PTT 2.8.241

Hyster Yale Testing Software Version 5.3

Car ECU Programmer

ECU Chip Tuning

Heavy Duty Truck OBD Scanner