Merc-edes Ben-z C6 OEM Xentry diagnosis VCI DOIP Pass thur interfac is the latest interface for For Mer ce des & SMART vehicles
can replace Star C4/C5. XENTRY Diagnosis VCI acts as a Pass-through Interface, also called MB Star C6, For Ben-z C6 multiplexer to
provide complete communication between a vehicle and the XENTRY software loaded on a PC.

Merc-edes Be-nz Xentry diagnosis VCI DOIP Pass thur interface C6 Summary:
Merc des Be-nz Xentry diagnosis VCI DOIP Pass thur interface C6 (Vehicle Communication Interface) multiplexer serves as the
interface to the vehicle when performing diagnosis and repairs, and programming electric and electronic on-board vehicle systems.

The Merc-des Ben-z Xentry diagnosis VCI DOIP Pass thur interface C6 does not have its own PC core, battery, fan, or display. It is
operated using the VXDIAG For XENTRY Diagnosis Pad via WLAN or a USB cable connection.

Merc-edes Ben-z Xentry diagnosis VCI DOIP Pass thur interface Ben-z C6 Introduction:
Compatible Software: VXDIAG For XENTRY/Das Software
Support Vehicle: Mercede For Ben-z & Smart vehicles
DoIP: Support DoIP
Functions: Star Diagnostic & programming (SCN Coding)
Merce des Ben-z Xentry diagnosis VCI DOIP Pass thur interface C6 Features:
Can be used for all model series of For Merc edes For Ben-z vehicles
Support DoIP, cover more functions during SCN Coding than SD C4/C5
Functions including diagnosing, programming, simulation studying, repair information, automotive maintenance, technical service
bulletin and so on
Diagnosis updates no longer necessary – firmware updates required on rare occasions
Does not need a power supply unit for external power supply
Dandy multiplexer with a small, sturdy construction (no PC core, battery, fan, or display)
Engines (All Gasoline & Diesel Systems)
Transmissions and Electronic Selector Modules
Airmatic and Active Body Control Suspension Systems
Traction Systems: ESP / ASR / ETS / ABS / BAS / SBC braking systems
Supplementary Restraint Systems (SRS) / Airbag, All body modules OCP / UCP / LCP / SCM / SKF / KFB / RCM / DCM's
Drive Authorisation System
Sam (Signal Acquisition) Modules
Electronic Ignition System (EIS)
Pneumatic System Equipment and ATA functions
Air Conditioning / climate control Systems
Instrument Cluster
Tyre Pressure Control
Parktronic System
Keyless Go
D2b Command & Audio Gateway (D2B and MOST networks)
TV Tuner
Headlamp Range Adjustment
Seat Electronics
Rvc, RST & Vario Roof modules
Automatic Clutch System ACS
M-Class Body Modules (AAM / EAM / DAS / SEM / VG Transfer Case)
Assyst & ASSYST + systems

Specal diagnostic progreamming equipment forMercedes Benz smart Maybach

Support DiagnosticsCoding Coding

Support for Benz all-around model

Support Engineer Application

WHAT ARE THE CHARACTERISTICS OFBENZ ENGINEERS?
1. Offline programming
2.Code setting of individual control unit
3.Brush hidden
4.Increase or decrease configuration code (add)
5.Read / delete fault code separately
6.Read I store the programming software number of the whole vehicle module
7.Quick test
8.One key synchronization module datareplacement module
9. supports wifi & DOIP