Autel Key Fob Programming Scan Tool IM608 Pro is a comprehensive key and immobilizer programming package of the MaxiIM IM608 Pro 10.1-inch Android touchscreen tablet, XP400Pro key and chip programmer, the wireless JVCI J2534 pass thru programming device and the Key Programming Adapter IMKPA kit, APB112, G-BOX2.

Autel IM608 PRO vs Autel IM608:

● Better support for B,W, Mercedes Benz

● Better read/ write EEPROM: 445 different chip types newly added suppo
of AM29FXXX series, MB29FXXX series

● Read/Write Engine ECU: 41 chip types added write support for SIMTEC76(AM29F800BB)_ WRITE

● Read/ wtire MCU: up to 2067 chip types

● Read/write Immbilizer ECU: up to 181 chip types

● Read/ write Odometer: up to 171 types

● Unlock key: support 11 key types(Audi/BMW)

Autel Key Programming & IMMO Tool

Autel Scanner MaxiIM IM608 Pro enables key learning directly through the OBDII port for vehicles like BMW, Benz, VW, Toyota, vcads etc. The tablet can read the immobilizer pins and password directly from the vehicle and store this information to use later when learning the newly programmed keys to the vehicle.

- Smart Mode: for Guided and Automated Key Learning
- Expert Mode: for Advanced Key Learning
- Read PIN/CS(All Key Lost)
- IMIMO Refresh/Coding
- Generate Key
- BENZ 3rd Generation IMMO Add Key, All key Lost, Key Learning
- Key Learning
- BMW FEM/BDC Key Learning and Adaptation
- Remote Learning
- BMW CAS4/3/2 Key Learning
- Backup/Restore IMMO Data
- VW/AUDI MQB Key Learning, 48 Transponder (96-bit) Add Key. All Key Lost, A6 All Key Lost, and More
- IMMO Reset/ Adaptation

Autel IM608 PRO IMMO Vehicle List:

- Audi:
A1, A3, A4, A5, A6, RS4, B6, B7, RS5, RS6, A4 Allroad, A8, S8, Q3, RSQ3, Q5, Q7, R8, TT
- Seat:
Alhambra, Altea, Altea, Cordoba, CupraLeon, Exeo, Ibiza, Leon, Mii, Toledo
- Skoda:
Citigo, Fabia India, Fabia, Kamiq, Karoq, Octavia, Rapid India, Rapid, Roomster, Superb, Yeti
- VW:
Amarok, Arteon, Atlas, Beetle, Bora, BoraGli, Caddy, Crafter, EOS, Fox Africa, Fox EU, Fox, GTI, Gol County, Gol(5U), Gol(5W), Golf PLUS, Golf/Rabbit(1K), Golf6 ESTATE, Jetta, Parati, Passat, Phaeton, Polo, Scirocco, Sharan, Suran, T-Roc, Tiguan, Touareg, Touran, Transporter5/Multivan, up, UP!/cross UP!
- Fiat:
500, 500L, 500X prox, Albea, Boxer, Daily, Doblo, Doblo New, Ducato, Egea, Fiorino, Freemont, Idea, Grande punto, Jumper, Linea, Marea, Nemo, Ottimo, Palio, Palio RST, Panda, Perla, Promaster, Punto, Sinea, Stilo, Viaggio

More IMMO vehicle models please check vehicle coverage by this website:
Click here to check vehicle coverage

31+ Maintenance Functions:

Autel MaxiIM IM608 PRO diagnosis scanner not only has powerful key programming functions, but also has a vast range of service functions. such as Oil reset, ABS reset, Auto bleeding, SRS reset, BMS, EPB, DPF Reg, Throttle and etc.

● Oil Reset
Reset the oil life systems every time the oil and oil filter are changed;

● Injector Coding
Code new injector numbers to replace the previous one when fitting the new injectors or after the replacement is completed;

● Brake Reset
Deactivate and activate the brake control system, assist with brake fluid control, open and close brake pads, etc.;

● SAS Reset
Perform steering angle sensor calibration and clear records;

● BMS Reset
Evaluate the battery charge state, register the battery replacement, etc.; More completed battery and startor related detail working with BT506;

● ABS Bleeding
When the ABS contains air, the ABS bleeding function must be performed to bleed the brake system to restore ABS brake sensitivity;

● Relearn Throttle
Initialize the throttle so that the "learned" values stored on ECU are returned to the default state;

● Key Coding
Help ECU to recognize the new keys when you need to add new keys, delete the lost keys;

● DPF REG
Clear PM (Particulate Matter) from the DPF filter through continuous combustion oxidation mode to stabilize the filter performance;

● Gear Learn Perform gear learning for the car when the engine ECU, the crankshaft position sensor, or the crankshaft flywheel is replaced.

ECU Coding & Programming

Autel IM608 Pro allows you to enjoy the same Online coding functions as MS908 & MK908P.

- Online Coding:

Compatible with Volkswagen, BMW, Seat, Porsche, Renault, etc.
Reprogram the adaptive data for certain components after repair or replacement.
Customize the OE-settings(setting alarms, doors locking, etc.).
Enhance the vehicle performance(provide a solution for power loss, fuel efficiency, etc.).

- Online Online Coding:

Compatible with Volkswagen, BMW, Seat, Porsche, etc.
Obtain the online data from the server and no need to match Car Computer manually.
Code your car fast and easily via Internet to solve your car's problems.
Restore the vehicle functional status after replacing the on-board modules.

- Car Computer Module Replacement:

Compatible with Asian cars like Honda, Nissan, Toyota, Hyundai, Kia, etc. Introduce the new Car Computer module replacement to the car system and make the cars running smoothly.

- ECU Programming For BMW, Mercedes-benz:

Coming soon.

Active Test & Bi-directional Control

MaxiIM IM608 performs the same diagnostics level as Autel Scanner MS908S, which scan all available modules with bi-directional control capabilities, allowing users to send the commands to the tested CUs and monitor the activity of the actuators, so tester can quickly and precisely know if the specific system, subsystem or component is working regularly, like ABS pump, valves, window, door, roof, lamps and etc to check if the component is working functionally in daily maintenance or after repair.

OE-level All Systems Diagnosis:

Autel MaxiIM IM608 Pro features the same All System Diagnosis function as MS908/MK908P.

Able to perform OE-Level diagnosis on all car electronic systems like ABS, SRS, Engine, Transmission, Brake System and etc that you can find only on most sophisticated scan tools. It covers all available vehicle modules, including but not limited to PCM, EPS, PDM, TPM, BCM, ABS, SCCMCooling System, Electronic Power Steering, Lubrication System, Ignition System, Start System, Intake and Exhaust System, Fuel Supply System and etc. With complete capabilities for codes, live data, active test, Car Computer information, adaptation, matching and etc. (Not limited to above systems)

Autel MaxiIM XP400PRO

● Compatible + Autel IM508, IM608:
The XP400 Pro Adapter is designed to work with Autel IM508, IM608 Scan Tool to perform various IMMO special functions and Chip adapter, MCU Read/Write tasks and etc. When connected to XP400, IM508 will have virtually the same scanning capabilities and IMMO special Functions.

● IMMO Functions:
Autel XP400 Pro Car Special Adapter can work with Autel IM508 to further expand its IMMO functions to include forBMW CAS4 learning, making it capable to perform read PIN/CS, generation, learning, remote learning, IMMO reset/adaptation/refresh/coding, for-benz FEM/BDC Learning and adaptation, for-bMW CAS4/3/2 Learning and VW/for-audi/for-Skoda/Seat IMMO III/IV/V Add , All Lost. NOTE: IMMO functions are NOT universally compatible.

● Chip & EEPROM Scanning:
Autel XP400 Pro Automotive Special Scan Tool can read/write chip, read/write EEPROM, Read/Write , Basic MCU Read/Write, Read/Write MC9S12 Encryption Chip, Read/Write IC Card, Read/Write Mercedes Infrared, Remote Frequency Detect. NOTE: Specail Chip Adapter is NOT universally compatible. Please send VIN number to us to check compatibility.

● Capabilities for More than 80 Makes & Models:
Autel XP400 Pro Automotive Special Scan Tool can read/write chip, read/write EEPROM, Read/Write , Basic MCU Read/Write, Read/Write MC9S12 Encryption Chip, Read/Write IC Card, Read/Write Mercedes Infrared, Remote Frequency Detect. NOTE: Specail Chip Adapter is NOT universally compatible. Please send VIN number to us to check compatibility.

Autel MaxiIM G-Box2

G-BOX2 Features:

● MaxiIM Key Programming Tablet Accessory used with the XP400 Pro

● Mercedes-Benz All Keys Lost; 8X Times Faster Password Calculation For EIS W172, W204, W207; 4X Times Faster Password Calculation For EIS W209, W211, etc.

● Mercedes-Benz All Keys Lost, No More Repeated Insertions and Removals of IR Simulator W164/-2008, W251/-2008, W164/2009-, W169, W251/2009, W216, W221(partial), W202(K)/ W208(K)/ W210(K), W203(K)/W463(K)

● Mercedes-Benz All Keys Lost, Can Be Programmed on the Vehicle Without Removing the EIS Except For EIS W164 / -2008, W251 / -2008, W221, W202 (K) / W208(K) /W210(K), AND W203 (K) / W463 (K), All Other EISS Can Be Programmed On The Vehicle Directly.

● Fit for Mercedes-Benz All Keys Lost, BMW DME/DDE ISN Reading and Writing in Boot Mode or Bench Method

● Contains All Connections Including Cables, Fuse Connector, and CAN Line Connectors

Autel MaxiIM APB112

AUTEL APB112 Smart Key Simulator 46 4D Chip Compatible with MaxiIM IM508, IM608, XP400PRO

APB112 Features:

● Autel APB112 Smart key simulator
● MaxiIM Key Programming Tablet Accessory to Be Used with the XP400 for 4D transponder functions
● Support 46, 4D data collection
● Support 46 Smart key password calculation (Hyundai/Kia 46)
● Support 46 chip simulation
● Support Toyota 4D (94/D4, 98) smart key simulation
● Support Toyota H (88/A8, A9, 39) smart key simulation
● Support Collects data from the ignition coil
● Support Identifies ignition coil troubles
● Support Decodes vehicle key chip data
● Simulate vehicle key chip (ex - 4D chip)
● Used with Autel diagnostic tool
● Support Toyota/Lexus smart key all key lost
● Support Chip decoding (Hyundai 46)

How to Use Autel APB112?

1. Connect the APB112 Smart Key Simulator to Autel Diagnostic Device using the supplied USB cable.
2. After connection, the status indicator lights solid blue,indicating that the APB112 Smart Key Simulator is working properly and then automatically communicates with the Diagnostic Device.
3. The APB112 Smart Key Simulator application is automatically upgraded on Autel Diagnostic Device according to the selected vehicle system function.
4. Place the Smart Key Simulator close to the ignition coil for data collection, which is used for decoding the chip.After decoding, the original car chip data can becopied.
5. The emulator key chip can generate various types ofkey chips with subsequent upgrades according to requirements.

Autel Toyota 8A Blade AKL Kit

Autel MaxiIM TOYOTA 8A BLADE AKL KIT, Autel Toyota 8A Non-Smart Key All Keys Lost Adapter Work with APB112 and G-Box2.

Toyota 8A Adapter Features:

● Used for programming of Toyota/Lexus/Scion 8A blade keys
● No need to disassemble or replace immobilizer in All Keys Lost situation
● Compatible with Autel MaxiIM Series
● To Use with APB112 Smart Key Emulator, G-BOX2 and any MaxiIM Series

Autel MaxiIM IMKPA Kit

IMKPA is a Key Programming Adapter Kit, compatible with the XP400Pro Key & Chip Programmer. Includes 12 adapters for the XP400Pro that enable Read/Write/Erase for Mercedes Benz ESL_W209 / W906 Data, Mercedes Benz NEC Key Learning, BMW EWS3 Key Learning and. Volkswagen/AUDI/BMW/Benz Key Unlock. Compatible with the IM608 and IM508 with XP400Pro.

IMKPA Kit Featuers:

Autel IMKPA Key Programming Accessories Kit to Use with XP400 Pro

● Currently supports over 10 key unlock types
● BMW EWS3 key learning
● Benz NEC key learning
● Benz ESL_W209 read/write/erase
● Compatible with IM508 and IM608 (XP400Pro required)
● Compatible with IM508, IM608 and IM608 Pro (XP400Pro required)

IMKPA Kit Packing List:

1pc x APB113
1pc x APB114
1pc x APB115
1pc x APB118
1pc x APB119
1pc x APB120
1pc x APB121
1pc x APB122
1pc x APB123
1pc x APB126
1pc x APB127
1pc x APB128
1pc x Storage est

Autel IM608 PRO Packing List:

1pc x MaxiIM IM608 Pro
1pc x MaxiFlash J-2534 VCI
1pc x XP400 Key Programmer
1pc x APA107 (Connect Cable)
1pc x APA106 (MC9S12 Clamp)
1pc x APA105 (MCU Clamp)
1pc x APA104 (ECU Clamp)
1pc x APA103 (EEPROM Clamp)
1pc x APA101 (Single Cable)
1pc x APA002 (EEPROM Socket)
1pc x APB108 (MCU_FQFP176)
1pc x APB107 (MCU_FQFP144)
1pc x APB106 (MCU_FQFP112)
1pc x APB105 (MCU_FQFP80)
1pc x APB104 (MCU_FQFP64)
1pc x APB102 (MB IR Cable)
1pc x APB101+APD101 (EEPROM Adaptor + EEPROM Adaptor Shell)
1pc x APC101 (USB Cable)
1pc x AAC001 (MED17 Cable)Light Fuse 6*30mm (2pcs)
1pc x AC/DC Adapter (12V)
1pc x Carrying est
1pc x USB Cable
1pc x Cigarette Lighter
1pc x Quick Reference Guide
1pc x IMKPA Kit (Buy Separately)
1pc x Autel APB112 (Buy Separately)
1pc x G-Box2 (Buy Separately)

Autel IM608 PRO Specification:

● Operating System:
Android™ 4.4.2, KitKat

● Processor:
Samsung Exynos hexa-core Processor (1.3GHz Quad-core ARM Cortex-A7 + 1.7GHz Dual-core ARM Cortex-A15)

● Memory:
2GB RAM & 64GB On-board Memory

● Display:
10.1-inch LED capacitive touch screen with 1920x1200 resolution

● Connectivity
Wi-Fi (802.11 a/b/g/n/ac)
USB: 2.0
BT v.2.1 + EDR
SD Card (Support up to 32GB)
HDMI

● Sensors:
Gravity Accelerometer, Ambient Light Sensor (ALS)

● Power and Battery
15000 mAh 3.8 V lithium-polymer battery
Charging via 12 V AC/DC power supply with the temperature between 0°C and 45°C

● Input Voltage:
12 V (9-24 V)

● Power Consumption:
6.5 W

● Operating Temp:
0 to 50°C (32 to 122°F)

● Storage Temp:
-20 to 60°C (-4 to 140°F)

● Dimensions (WxHxD):
300 mm (11.81") x 220 mm (8.66") x 50 mm (1.97")

● Weight:
NW: 1.42 kg (3.13 lb.)
GW: 8.655 kg (19.08 lb.)

● Protocols:
ISO 9142-2, ISO 14230-2, ISO 15765-4, K/L-Line, Flashing Code, SAE-J1850 VPW, SAE-J1850 PWM, CAN ISO 11898, Highspeed, Middlespeed, Lowspeed and Singlewire CAN, GM UART, UART Echo Byte Protocol, Honda Diag-H Protocol, TP 2.0, TP 1.6, SAE J1939, SAE J1708, Fault-Tolerant CAN