Mitsubish MUT-3 Diagnostic Scanner Car Diagnostics Scanner

Introduction:Mitsubish MUT-3 Diagnostic Scanner

Price:Best Price

Mitsubish MUT-3

In accordance with releasing new products that introduce CAN communications
systems, MMC has developed the MUT-III as a next generation diagnosis tester
for servicing these new and future vehicles.

A personal computer (PC) is connected to the MUTIII unit and used as a systems
control terminal, and communicates with a vehicle ECU through the VCI. In addition
to being able to handle all diagnosis functions covered by the conventional MUT-II
tester, the MUT-III system can display data as easy-to-understand diagrams and
graphs on a large screen of the PC. Unlike the MUT-II, the MUT-III can retain data
on all vehicles, from old to new models, classified according to destination in the
PC s hard disk. This eliminates the awkward but essential job with the MUT-II, of
switching the data list (communications protocol data and diagnosis item list data
-base) by replacing the ROM pack with another according to the vehicle model and
year model.

New functions that make use of the advantages of the PC are also being developed.
For example, the workshop manual viewer is a useful function for mechanics as they
no longer have to carry around a thick manual and search for relevant pages while
working on a vehicle. The workshop manual viewer is currently available for certain
vehicle models, and allows users to retrieve the pages containing the failure code
for a particular problem at the push of a button.
Software Supported Languages:
English, Czech, French, German, Greek, Italian, Spanish, Turkish

Supported Cars:
Mitsubishi

Set Includes:

Vehicle Communication Interface (VCI) (MB991824) (1 pc)
A communication interface used to connect the vehicle
ECUs and the PC.
1. When connected with the PC
- Vehicle diagnosis (Interactive fault diagnosis)
- SWS communication; CAN communication support
- Drive recorder
- ECU reprogramming
- Volt, Ohm, measurement
- Fuel pressure measurement (not available in US)

2. When used with the VCI unit (disconnected from PC)
- VCI Stand-alone diagnosis
- Drive recorder
- ECU reprogramming
- Volt, Ohm measurement
- Belt tension measurement

Memory Card
Stores data for ECU reprogramming, drive recorder, etc. This is a standard,
off-the-shelf memory card. The one provided (with reprogramming data) is
a Compact Flash memory card (MB991853) inserted into the CF card adapter
(MB991939).

MUT-3 Main Hardness A (MB991910)
Used when connecting the VCI with vehicles that has only one 16-pin diagnosis
connector.
- Supports fault diagnosis and ECU updating on the above-described vehicles
- Supports the CAN communication system

MUT-3 Main Harness B (MB991911)
Used when connecting VCI with vehicles that has a 16-pin + 12-pin or 16-pin
+ 13-pin diagnosis connector.
For models equipped with only 12-pin (or 12-pin + 12-pin) diagnosis connector,
connect the MUT-2 adapter harness (MB991498) to the end of this harness in the
same as MUT-2, and power is supplied from the cigarette lighter socket.